Fly Ash, Limestone, Powder, Carbon Slag, Sawdust, Sludge, Gypsum Ball Pressing Machine

• Pressing Mode: Twin-roller
• Product Shape: Spheric Shape
• Motor Type: AC Motor
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: M650
• Condition: New
• Warranty: 1 Year
• After-sales Service: Support Customization
• Yield: 8-12t/H
• Motor Power: 22kw
• Applicable Materials: Mineral Powder, Fluorite Powder, Iron Powder, etc
• Pressing Roller Size: 650*350
• Transport Package: Wooden Box
• Specification: 650mm
• Trademark: Fude
• Origin: Henan China
• HS Code: 8474801000
• Production Capacity: 8-12t/H
• Package Size: 340.00cm * 200.00cm * 220.00cm
• Package Gross Weight: 6500.000kg

Product Description

Ball press is also called: strong ball press, mineral powder ball press, roller ball press, goose egg forming machine and so on. The ball press machine is mainly used for making balls and blocks of nonferrous and black metal ore powder, which is directly smelted into the furnace to improve the added value. All metallurgical industry waste, auxiliary materials need to be on the furnace, all need to press the ball to complete. Such as: dust dust, pool mud, oxide, steel slag, iron powder, aluminum ash powder, silica manganese ore powder and so on. 

The ball press machine is mainly used for tailings treatment of minerals to press powder materials that are difficult to form. Its characteristics are high forming pressure, adjustable main machine speed, and equipped with a spiral feeding device that is transmitted to the reducer through a belt. The reducer is transmitted to the driving shaft through a coupling, and then to a pair of open gears, ensuring that the two rolling shafts are synchronized (equal speed reverse). The material storage bin is evenly fed into the forming hopper through a quantitative equipment, so that the unit forming pressure of the material changes from small to large, The forming pressure reaches the maximum value at the center line of the opposite roller, and after the material passes through this line, the forming pressure quickly decreases, causing the material to enter a state of ball detachment and smoothly release the ball.

Ball pressing machine can be used to press various powders, powders, waste materials, and waste residues such as coal powder, coking coal, coal slurry, iron powder, iron filings, mineral powder, slag, tailings, etc. It is widely used in industries such as refractory materials, power plants, metallurgy and chemical engineering, energy, transportation, heating, etc.Performance characteristics:                                                                                         
1. High economic efficiency: The materials produced by the ball pressing machine after forming are energy-saving, environmentally friendly, easy to transport, and improve waste utilization, which has good economic efficiency Benefit and social benefits.2. Abundant supporting equipment: A comprehensive set of ball pressing machine equipment supporting products, providing a one-stop solution. 3. Full worry free service: Equipment maintenance is simple, loss is small, and if you encounter technical problems during use, you can contact us at any time. We promise to provide comprehensive technical support to solve your future worries.
The pressure ball machine is mainly used to press powder materials that are difficult to form. The characteristics of the briquette pressure ball machine are high forming pressure, adjustable main engine speed, and equipped with a screw feeding device. The ball pressing machine is powered by an electromagnetic speed regulating motor, which is transmitted to the driving shaft through a belt pulley, a circular gear reducer, and a rod pin coupling. The active shaft and passive shaft of the briquette press ball machine are ensured to operate synchronously through open gears. A hydraulic device is installed behind the passive bearing seat. The roller skin is cast. After special heat treatment, the hardness can reach over 58 degrees. The roller skin is assembled in combination and can be replaced after wear. The mineral powder ball pressing machine has a buffer device, which can better protect the equipment from hard object impact. The mineral powder ball pressing machine is designed with an adjustable ball bowl device to ensure that the two sets of leather ball bowls are within the adjustable range without misalignment.

Equipment model	M360-4	M450	M550	M850	M1000
Spindle speed (r/min)	15-17	15-17	15-17	15-17	15-17
Motor model	Y160M-4	Y132M-4	Y180L-4	Y225S-4/Y112M-4	Y225S-4/Y112M-4
Production(t/h)	4-7	5-8	8-10	35-40	40-45
Speed ratio	01:31.5	01:31.5	01:31.5	01:31.5	01:31.5

Equipment production and usage scenarios

Requirements for material forming by ball pressing machine: 1. The particle size of the material can be up to 5mm. 2. No metal objects are allowed in the material. Otherwise, the surface of the roller skin will be damaged. 3. The material supply must meet the requirements, and it is advisable to use a screw feeder with adjustable speed to observe the amount of returned material and adjust the supply of new material.  

Ball pressing machines are widely used due to their simple structure, convenient operation, and reliable performance.  The ball press equipment has a high ball forming rate, low power consumption, compact structure, and is easy to maintain and debug.  The shape and size of the ball socket on the roller skin of our company's ball press can be selected from a large range according to user needs.

Delivery and loading diagram of ball press machine

FAQ                                                               
Q:Are you a trading company or a manufacturing factory?
A:We are a factory.
Q:What is your delivery time?
A:If the goods are in stock, it usually takes 7-10 days.
If the goods are out of stock, it will take 15 to 30 days, calculated by quantity.
Q:What is your payment method?
A:30% of the total price should be paid in T/T as the down payment; 70% of the remaining payment should be paid in T/T before delivery.
Q:Do you provide technical guidance?
A:Yes, we will provide you with professional advice on the selection of models and the operation of equipment.