Large Wooden Ear Material Grinder, Wood Edible Mushroom Sawdust Machine, Wood Crusher

• After-sales Service: Support Customization
• Power Source: Electric
• Automatic Grade: Full-Automatic
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: M700
• Warranty: 1 Year
• Production: 3500kg/H
• Using Materials: Use of Log Crushing
• Spindle Speed: 2100
• Accessory: Screens, Hammer Blades
• Transport Package: Wooden Box
• Specification: 1.5*0.7*1m
• Trademark: Fude
• Origin: Henan, China
• HS Code: 8474209000
• Production Capacity: 3500kg/H

Product Description

Wood crusher is a new type of ideal equipment for producing sawdust. It has added a side feed port and slicing device to the original foundation, which can convert larger diameter round wood, square wood, leftover materials
High fiber stem raw materials such as veneer, building formwork, corn cob, bark, leaves, branches, etc. are processed into sawdust in one go, which has the advantages of low investment, low energy consumption, high productivity, and good economic benefits,
It has the advantages of convenient use and maintenance, and is widely used as a raw material for biomass particles, paper making, machine made charcoal, edible fungi, creative boards, and sawn high-density boards.

Performance characteristics of a wood crusher:
1. This machine is composed of an array of blades, and materials are crushed by high-speed rotating blades.
2. The processed raw materials enter the feeding mouth and form a self-priming feed through the rotation of the fan blades in the machine, which can improve the agreed Factor of safety.
3. This machine adopts an integrated fan, which can directly pump crushed materials into the car. It has the advantages of small footprint, labor saving, energy saving, and high efficiency.
4. The fineness adjustment of this machine is based on the size of the sieve bottom aperture. The yield is determined based on the size of the finished product you need, and the larger the particle size of the finished product, the greater the yield.

Main application areas
Wood grinder is widely used in machine-made charcoal factory, Foxiang factory, Engineered wood factory, biological power plant, Paper mill sawmill, feed factory, breeding farm, mushroom mushroom base, landscaping project, furniture factory, and wood processing

Installation and commissioning operations
1. Configure the appropriate power cord and control switch according to the power configuration of the device, connect the power supply, and check if the motor direction is correct.
2. The equipment should be installed on a horizontal concrete foundation and fixed with anchor bolts.
3. When installing, it should be noted that the main engine pulley and motor pulley are pulled in a straight line using a triangular belt
4. After installation, check whether the bolts in each part are loose and whether the main engine compartment door is fastened. If there is any looseness, please tighten it
5. It is strictly prohibited to throw wood with stones and nails into the machine to prevent damage to the knives and internal parts.
6. Pay attention to checking the hammer bolts. If any looseness is found, tighten them immediately. When the hammer and bolts are severely worn, they should be replaced
7. After the inspection is completed, conduct a no-load test run, and production can proceed once the test run is normal.
8. When the particles cannot reach the desired size, switch to a different pore size sieve.
9. When replacing the cutting tool, the blade extends 2-4mm beyond the flat surface of the cutting disc, and then tighten the bolt. If the pressure bolt thread is found to be worn, it should be replaced immediately to prevent damage to the sliding disc nut.

FAQ                                                               
Q:Are you a trading company or a manufacturing factory?
A:We are a factory.
Q:What is your delivery time?
A:If the goods are in stock, it usually takes 7-10 days.
If the goods are out of stock, it will take 15 to 30 days, calculated by quantity.
Q:What is your payment method?
A:30% of the total price should be paid in T/T as the down payment; 70% of the remaining payment should be paid in T/T before delivery.
Q:Do you provide technical guidance?
A:Yes, we will provide you with professional advice on the
selection of models and the operation of equipment.