The machine can process various types of wood, wood scraps, branches and forks, wood chips, board scraps, bark, bamboo, bamboo bark, and other raw materials into sawdust and filamentous products in one go. It has the advantages of low investment, low energy consumption, high productivity, good economic benefits, and convenient use and maintenance. The crushed wood chips have the advantages of small particle size and uniform discharge of wood fiber. The entire equipment is only driven by one electric motor, with a simple structure, compact layout, low price, stable operation, low energy consumption, high output of wood chips, and low processing cost. It can also be used for cutting chips of fiber like materials such as bamboo, thatch, corn stalks, and sorghum stalks. This sawdust machine can also be used as a raw material for the production of high density boards such as creative board and sawdust board.
operational principle
Adopting blade cutting, high-speed airflow impact, and collision dual crushing functions, it can simultaneously complete the micro material sorting and processing process. During the blade cutting and crushing process, the rotor generates high-speed airflow, which rotates in the cutting direction of the blade. The material accelerates in the airflow and repeatedly impacts, causing the material to be subjected to dual crushing and accelerating the crushing rate of the material.
Crushing principle:
1. It consists of three major parts: the body, the middle body, and the lower body.
2. The crushing knife consists of a Type 7 knife, a Type 1 knife, and a centrifugal knife.
3. Pay by; Composed of fans, dust collectors, and dust collectors.
4. The main machine crushing room adopts Type 7 knives, Type 1 knives, and centrifugal knives, which have coarse crushing, fine crushing, and centrifugal re crushing. The motor drives the rotor of the crusher to operate at high speed, causing the machinery to generate high-speed airflow to produce high-strength impact force, compression force, cutting force, and friction force on the crushed materials, achieving the crushing function.
5. In the process of cutting and crushing with three types of blades, the rotor generates high-speed airflow that rotates in the direction of the blade. The material accelerates in the airflow and repeatedly impacts, cuts and rubs, and is subjected to three types of crushing effects. The crushed material enters the analyzer for analysis with the airflow. Due to the centrifugal force of the separator rotor and the centripetal force of the airflow, when the centrifugal force is greater than the centripetal force, Fine particles enter the powder collector with the airflow for collection, while coarse particles enter the centrifugal crushing chamber to continue crushing until they reach the desired fineness.
Maintenance and upkeep of the machine
1. The bearings of the host are responsible for the entire load of the machine, so good lubrication has a great impact on the bearing life, which directly affects the service life and operating rate of the machine. Therefore, it is required that the injected lubricating oil be clean and sealed well.
2. Each fastening screw is prone to loosening and must be checked regularly. If there is any looseness, it should be tightened in a timely manner.
3. Pay attention to replacing worn parts when checking the wear level of easily worn parts.
4. Regularly add lubricating oil to the friction position to ensure mechanical performance and lifespan.
5. If the bearing oil temperature rises, it should be stopped immediately to check the cause and eliminate it.
6. If there is any impact during the operation of the rotating gear, it should be immediately stopped for inspection and eliminated.
7. After the machine is not in use, it should be placed indoors and the sawdust inside the machine should be cleaned to avoid affecting future use and production.
Schematic diagram of device usage scenarios |
Zhengzhou Fude Machinery Equipment Co, Ltd,Established in 2015,A factorythat integrates machine research, development, manufacturing, and sales,Main production: metal briquetting machines, wood crushers,Organic fertilizer production line and large andmedium-sized equipment for dryers
Service tenet:Integrity based management, To ensure quality control,Satisfy both parties
Scene diagram of equipment shipment section |
FAQ
Q:Are you a trading company or a manufacturing factory?
A:We are a factory.
Q:What is your delivery time?
A:If the goods are in stock, it usually takes 7-10 days. If the goods are out of stock, it will take 15 to 30 days, calculated by quantity.
Q:What is your payment method?
A:30% of the total price should be paid in T/T as the down payment; 70% of the remaining payment should be paid in T/T before delivery.
Q:Do you provide technical guidance?
A:Yes, we will provide you with professional advice on theselection of models and the operation of equipment.