After-sales Service: | Support Customization |
---|---|
Power Source: | Electric |
Automatic Grade: | Full-Automatic |
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
The wood grinder integrates slicing and crushing, and can crush materials with a diameter of 30 to 300MM, including logs, pine, miscellaneous wood, fir, poplar, peach, tung, wood chips, and strips, It can also crush and trim branches and leaves, crush bamboo, leftover materials, waste wood, etc. Due to its reasonable structure and convenient movement, the machine can operate in fields, orchards, nurseries, etc, One machine is versatile and has a wide range of applications, especially suitable for outdoor mobile operations. |
Main application areas Wood grinder is widely used in machine-made charcoal factory, Foxiang factory, Engineered wood factory, biological power plant, Paper mill sawmill, feed factory, breeding farm, mushroom mushroom base, landscaping project, furniture factory, and wood processing |
Installation and commissioning operations 1. Configure the appropriate power cord and control switch according to the power configuration of the device, connect the power supply, and check if the motor direction is correct. 2. The equipment should be installed on a horizontal concrete foundation and fixed with anchor bolts. 3. When installing, it should be noted that the main engine pulley and motor pulley are pulled in a straight line using a triangular belt 4. After installation, check whether the bolts in each part are loose and whether the main engine compartment door is fastened. If there is any looseness, please tighten it 5. It is strictly prohibited to throw wood with stones and nails into the machine to prevent damage to the knives and internal parts. 6. Pay attention to checking the hammer bolts. If any looseness is found, tighten them immediately. When the hammer and bolts are severely worn, they should be replaced 7. After the inspection is completed, conduct a no-load test run, and production can proceed once the test run is normal. 8. When the particles cannot reach the desired size, switch to a different pore size sieve. 9. When replacing the cutting tool, the blade extends 2-4mm beyond the flat surface of the cutting disc, and then tighten the bolt. If the pressure bolt thread is found to be worn, it should be replaced immediately to prevent damage to the sliding disc nut. |
Suppliers with verified business licenses