The dry powder ball pressing machine mainly uses the dry method to press the ball, and there is no need to add water during the entire pressing process. It mainly compresses and shapes aluminum chips, magnesium chips, activated carbon alumina, quicklime, etc. High pressure is also one of the main characteristics of dry powder ball pressing machines. The composition of the dry powder ball pressing machine includes an electric motor, a reducer, a triangular belt, a rolling roller, an open gear, a casing, a base, a pressurized feeding device, a pressurized device, and a discharge device.
The ball press machine is mainly used for tailings treatment of minerals to press powder materials that are difficult to form. Its characteristics are high forming pressure, adjustable main machine speed, and equipped with a spiral feeding device that is transmitted to the reducer through a belt. The reducer is transmitted to the driving shaft through a coupling, and then to a pair of open gears, ensuring that the two rolling shafts are synchronized (equal speed reverse). The material storage bin is evenly fed into the forming hopper through a quantitative equipment, so that the unit forming pressure of the material changes from small to large, The forming pressure reaches the maximum value at the center line of the opposite roller, and after the material passes through this line, the forming pressure quickly decreases, causing the material to enter a state of ball detachment and smoothly release the ball.The pressure ball machine can be used to press various powders, powders, waste materials, and waste residues such as coal powder, iron powder, coking coal, aluminum powder, iron filings, iron oxide scale, carbon powder, carbon powder, slag, gypsum, tailings, sludge kaolin, activated carbon, coke, etc. It is widely used in industries such as refractory materials, power plants, metallurgy, chemical engineering, energy, transportation, heating, etc. The materials formed by the pressure ball machine are energy-saving, environmentally friendly, easy to transport, and improve the utilization rate of waste materials, It has good economic and social benefits.Performance characteristics:1. High economic efficiency: The materials produced by the ball pressing machine after forming are energy-saving, environmentally friendly, easy to transport, and improve waste utilization, which has good economic efficiency Benefit and social benefits.2. Abundant supporting equipment: A comprehensive set of ball pressing machine equipment supporting products, providing a one-stop solution. 3. Full worry free service: Equipment maintenance is simple, loss is small, and if you encounter technical problems during use, you can contact us at any time. We promise to provide comprehensive technical support to solve your future worries.
Ball press is a kind of equipment to press granular powder materials into balls, mainly used to press difficult to form powdered granular materials, such as: pulverized coal molding; Mineral powder molding; Desulfurization gypsum molding; Coke molding; Iron filings and various metal slag forming. Suitable for industrial gas, civil briquette, civil metallurgy, resistant materials, medicine and other materials forming. Its purpose is to reduce dust, control volume weight, return utilization, improve transport characteristics and so on.
Equipment model |
M360-4 |
M450 |
M550 |
M850 |
M1000 |
Spindle speed (r/min) |
15-17 |
15-17 |
15-17 |
15-17 |
15-17 |
Motor model |
Y160M-4 |
Y132M-4 |
Y180L-4 |
Y225S-4/Y112M-4 |
Y225S-4/Y112M-4 |
Production(t/h) |
4-7 |
5-8 |
8-10 |
35-40 |
40-45 |
Speed ratio |
01:31.5 |
01:31.5 |
01:31.5 |
01:31.5 |
01:31.5 |
Equipment production and usage scenarios
Requirements for material forming by ball pressing machine: 1. The particle size of the material can be up to 5mm. 2. No metal objects are allowed in the material. Otherwise, the surface of the roller skin will be damaged. 3. The material supply must meet the requirements, and it is advisable to use a screw feeder with adjustable speed to observe the amount of returned material and adjust the supply of new material.
Ball pressing machines are widely used due to their simple structure, convenient operation, and reliable performance. The ball press equipment has a high ball forming rate, low power consumption, compact structure, and is easy to maintain and debug. The shape and size of the ball socket on the roller skin of our company's ball press can be selected from a large range according to user needs.
Delivery and loading diagram of ball press machine
FAQ
Q:Are you a trading company or a manufacturing factory?
A:We are a factory.
Q:What is your delivery time?
A:If the goods are in stock, it usually takes 7-10 days.
If the goods are out of stock, it will take 15 to 30 days, calculated by quantity.
Q:What is your payment method?
A:30% of the total price should be paid in T/T as the down payment; 70% of the remaining payment should be paid in T/T before delivery.
Q:Do you provide technical guidance?
A:Yes, we will provide you with professional advice on the selection of models and the operation of equipment. |