The fully automatic hydraulic oil press is a machine that directly adds the fried oil into the oil barrel of the fully automatic hydraulic oil press to press and extract oil. The full-automatic hydraulic oil press has simple and fast procedures, and is specially suitable for users in sesame, peanut and other production areas. The fully automatic hydraulic oil press mainly consists of a plunger, hydraulic cylinder, column, movable top, base, workbench material cylinder, heating ring, fixed sleeve, oil tank, etc. The materials of the fully automatic hydraulic oil press are all made of excellent metal materials, which accelerates the machine performance and ensures the service life of the components.
The night press oil press is an oil press machine that uses hydraulic oil to transmit pressure through an oil pump, and is equipped with a temperature control device to allow oil to be released under high pressure and high temperature conditions. According to the driving power source of the oil pump, there are two types: manual and electric. According to the method of applying pressure to the broken cake, it can be divided into vertical and horizontal.
The main components of this machine include transmission box, hydraulic cylinder, piston, column, movable top, base, material cylinder, distribution box, pressure gauge, and automatic temperature control device. This machine is made of metal materials such as steel and steel forging parts, thereby improving the performance and service life of the machine.Suitable for pressing various materials: sesame, walnuts, chestnuts, cashews, pine nuts, baobab trees, cocoa butter, nuts, avocado, olives, grape seeds, camellia seeds, prickly pears, etc.Advantages of hydraulic oil press:
1. High production capacity and high-quality finished oil: using the most advanced technology, the oil has less impurities and high nutritional content.
2. Simple operation and low labor intensity: The operation is simple, only 1-2 workers are required, and training is provided, making it easy to learn. Workers only need to inspect on the machine and do not need to do too much work.
3. Required small spacing and low power consumption: no more than 2 meters in height, no more than 2.8 meters in length, and no more than 1.3 meters in width. You can easily put it into your home or farm to start your own business, with lower power required for operation. It can save a lot of electricity bills.The fully automatic hydraulic oil press is a machine that directly adds the fried oil into the oil barrel of the fully automatic hydraulic oil press to press and extract oil. The full-automatic hydraulic oil press has simple and fast procedures, and is specially suitable for users in sesame, peanut and other production areas. The fully automatic hydraulic oil press mainly consists of a plunger, hydraulic cylinder, column, movable top, base, workbench material cylinder, heating ring, fixed sleeve, oil tank, etc. The materials of the fully automatic hydraulic oil press are all made of excellent metal materials, which accelerates the machine performance and ensures the service life of the components.
Product Features
1. The actual working pressure value is high, the oil output rate is high, and the safety is high.
2. Replacing decorative chrome with hard chrome will not detach from the coating.
3. The load-bearing plates and columns are made of characteristic steel instead of ordinary steel, ensuring durability and safety.
4. Professional inspection shall be conducted on key parts every millimeter, and any problems shall be scrapped. Manufacturing of defective boards is not allowed.
5. Adopting high-quality motors to ensure strong cardiac power and low failure rate.
6. Patent barrel to increase oil production while ensuring strength
7. Design. Reduce the height of the main engine base plate and improve the dust prevention effect of the fuel tank.
Precautions and operating methods before starting the hydraulic oil press
1. Clean the mailbox thoroughly and add enough hydraulic oil
2. Check if the bolts in each part are loose.
3. Check if the wiring is correct and connect the ground wire
4. After turning on the power, raise the automatic temperature control switch to around 70 degrees. First, place a cushion on the lower hole plate in the material barrel, then add the fried oil to the material barrel. After filling it up, place the cushion and the partition plate. Close the movable cover and start pressing. Place the directional valve in the upward position for about 6-10 minutes
Clock, complete
5. When the pressure gauge pointer sounds like a red needle at 50 MPa, the electrical control system automatically stops. When a small amount of oil seeps out of the material barrel, the pressure gauge pointer drops to a green needle at 46 MPa, the electrical control system automatically starts, and the pressure rises again. There is no oil seeping out of the material barrel, and the oil has been completely discharged before unloading.
6. Relieve the pressure, hold the handle of the directional valve and slowly place it in the descending position, so that the material barrel can be lowered to a distance of about 100 millimeters. Place the directional valve in the middle empty position, and pull open the movable top to take out the cake
7. Place the directional valve in the raised position and start to raise the material cake. Wait until the hole plate on the piston plate is about 5mm from the discharge cylinder surface. Leave the directional valve in the middle position and remove the upper partition plate and cushion. Take out the material cake
8. Then place the directional valve in the lowering position to quickly lower the piston and prepare for further pressing
Equipment model parameters
| Equipment model |
6YZ-180 |
6YZ-230 |
6YZ-260 |
6YZ-300 |
6YZ-320 |
| Nominal pressure(KN) |
1600 |
2200 |
2600 |
3000 |
3500 |
| Working pressure(Mpa) |
55-60 |
55-60 |
55-60 |
55-60 |
55-60 |
| Heating coil power(KW) |
1 |
1 |
1 |
2 |
3 |
| Diameter of slag cake |
180 |
230 |
260 |
280 |
320 |
Factory production display diagram
Zhengzhou Fude Machinery Equipment Co, Ltd,Established in 2015,A factorythat integrates machine research, development, manufacturing, and sales,Main production: metal briquetting machines, wood crushers,Organic fertilizer production line and large andmedium-sized equipment for dryers
Service tenet:Integrity based management, To ensure quality control,Satisfy both parties.
The hydraulic oil press is easy to use and has a high oil yield. It is used to press sesame, peanut, walnut, almond, pine seed, tea seed and other high oil crops. The main components of this machine include transmission box, hydraulic cylinder, piston, column, movable top, base, material cylinder, distribution box, pressure gauge, and automatic temperature control device. This machine is made of metal materials such as steel and steel forging parts, thereby improving the performance and service life of the machine.FAQ
Q:Are you a trading company or a manufacturing factory?
A:We are a factory.
Q:What is your delivery time?
A:If the goods are in stock, it usually takes 7-10 days.
If the goods are out of stock, it will take 15 to 30 days, calculated by quantity.
Q:What is your payment method?
A:30% of the total price should be paid in T/T as the down payment; 70% of the remaining payment should be paid in T/T before delivery.
Q:Do you provide technical guidance?
A:Yes, we will provide you with professional advice on the selection of models and the operation of equipment.
Audited Supplier 
){kind=link}
){kind=link}