The wood pulverizer produced by our factory integrates slicing and crushing, and can cut wood with a diameter of 1-20 centimeters. It can also be used for cutting and crushing fiber like materials such as bamboo, straw, mushroom, garden branches, corn cobs, etc.It is a new type of production equipment for wood crushing. This wood grinder is particularly suitable for processing wood chips in edible mushroom culture media, and can also be used as raw materials for the production of particleboard and sawdust board high-density boards.
The comprehensive crusher is a special equipment for biomass power plant fuel storage. The crushing raw materials are mainly all kinds of trees, small diameter trees, wood cutting residues (such as branches, twigs, etc.) and wood processing residues (such as veneer, Flat noodles, log core, waste veneer, etc.). It can also crush non wood raw materials (such as hemp stems, reeds, bamboo, corn straw, cotton firewood, etc.). This machine has the characteristics of wide adaptability to raw materials, high output, reasonable structure, easy operation, safety and reliability, and convenient maintenance, making it an ideal biomass crusher worldwide.
The comprehensive crusher is composed of a base, upper and lower feeding systems, chain plates or belt conveyors, knife rollers, comb plates, as well as bottom knives, screens, motors, hydraulic systems, electrical control systems, and other components.
Working principle: Install flying knives or tiger claws on the knife silver, and use specially manufactured high-strength bolts to fix it on the knife roller through pressure blocks; Cut or crush the raw materials, and qualified wood chips fall into the conveyor belt through the holes in the sieve at the bottom of the knife roller and are brought into the silo or the next stage. Wood chips that do not meet the specifications are cut again until they are qualified.
1.The template crusher uses thickened blades with strong hardness and durability
2.Strong and sturdy structure with densely distributed reinforcing ribs, making the box strong and sturdy
3. Automatic button control, safe and convenient, high output, low noise
4. The template crusher can be equipped with conveyor belts for feeding
Maintenance and upkeep of the machine:
1. The bearings of the host bear all the load of the machine, so good lubrication has a great impact on the bearing life, which directly affects the service life and operating rate of the machine. Therefore, it is required that the injected lubricating oil be clean and sealed well.
2. Each fastening screw is prone to loosening and must be checked regularly. If there is any looseness, it should be tightened in a timely manner
3. Pay attention to checking the wear level of easily worn parts and promptly replace worn parts.
4. Regularly add lubricating oil to the friction position to ensure mechanical performance and lifespan.
5. If the bearing oil temperature rises, it should be stopped immediately to check the cause and eliminate it,
6. If there is any impact sound during the operation of the rotating gear, it should be immediately stopped for inspection and eliminated
7. After the machinery is not in use, it should be placed indoors and the sawdust inside the machinery should be cleaned to avoid affecting future use and production.
| Device |
1000 |
1200 |
1300 |
1400 |
1500 |
| Feed conveyor width (mm) |
1000 |
1200 |
1300 |
1400 |
1500 |
| Feed size (mm) |
1000*150 |
1200*200 |
1300*400 |
1400*400 |
1500*400 |
| Host motor (kw) |
58 |
63 |
90 |
110 |
132 |
| production capacity t/h |
5-10 |
7-15 |
15-20 |
20-25 |
25-30 |
| Equipment weight |
8 |
12 |
14 |
16 |
18 |
Advantages and characteristics:
1. Fixed, mobile, diesel engines, motors, etc. can be configured according to requirements
2. For the template design of construction sites, fearless metal items such as iron nails and wires are transported and fed using chain plates
3. The feeding speed can be automatically adjusted according to the load of the main motor. Three types of blades, namely the seven type blade, the one type blade, and the centrifugal blade, work together
4. Powerful crushing chamber cover adopts hydraulic opening
5. Easy to maintain and replace blade remote control, easy to operate, one person can work
| Product Usage Effect Display |
Zhengzhou Fude Machinery Equipment Co, Ltd,Established in 2015,A factorythat integrates machine research, development, manufacturing, and sales,Main production: metal briquetting machines, wood crushers,Organic fertilizer production line and large andmedium-sized equipment for dryers
Service tenet:Integrity based management, To ensure quality control,Satisfy both parties.
Professional design and precision craftsmanship
FAQ
Q:Are you a trading company or a manufacturing factory?
A:We are a factory.
Q:What is your delivery time?
A:If the goods are in stock, it usually takes 7-10 days.
If the goods are out of stock, it will take 15 to 30 days, calculated by quantity.
Q:What is your payment method?
A:30% of the total price should be paid in T/T as the down payment; 70% of the remaining payment should be paid in T/T before delivery.
Q:Do you provide technical guidance?
A:Yes, we will provide you with professional advice on the selection of models and the operation of equipment.
Audited Supplier 
){kind=link}
){kind=link}