Ball press is a kind of equipment to press granular powder materials into balls, mainly used to press difficult to form powdered granular materials, such as: pulverized coal molding; Mineral powder molding; Desulfurization gypsum molding; Coke molding; Iron filings and various metal slag forming. Suitable for industrial gas, civil briquette, civil metallurgy, resistant materials, medicine and other materials forming. Its purpose is to reduce dust, control volume weight, return utilization, improve transport characteristics and so on.
The ball press ensures that the material can enter the roller evenly through the quantitative feeding electromagnetic speed regulating motor provides power for the screw feeding device, the screw reducer rotates, and the material enters the main feed port through the belt.The pressure ball machine is mainly used to press powder materials that are difficult to form. The characteristics of the briquette pressure ball machine are high forming pressure, adjustable main engine speed, and equipped with a screw feeding device. The ball pressing machine is powered by an electromagnetic speed regulating motor, which is transmitted to the driving shaft through a belt pulley, a circular gear reducer, and a rod pin coupling. The active shaft and passive shaft of the briquette press ball machine are ensured to operate synchronously through open gears. A hydraulic device is installed behind the passive bearing seat. The roller skin is cast. After special heat treatment, the hardness can reach over 58 degrees. The roller skin is assembled in combination and can be replaced after wear. The mineral powder ball pressing machine has a buffer device, which can better protect the equipment from hard object impact. The mineral powder ball pressing machine is designed with an adjustable ball bowl device to ensure that the two sets of leather ball bowls are within the adjustable range without misalignment.
The pressure ball machine can be used to press various powders, powders, waste materials, and waste residues such as coal powder, iron powder, coking coal, aluminum powder, iron filings, iron oxide scale, carbon powder, carbon powder, slag, gypsum, tailings, sludge kaolin, activated carbon, coke, etc. It is widely used in industries such as refractory materials, power plants, metallurgy, chemical engineering, energy, transportation, heating, etc. The materials formed by the pressure ball machine are energy-saving, environmentally friendly, easy to transport, and improve the utilization rate of waste materials, It has good economic and social benefits.
Ball press is a device that presses powdered materials into balls. The application of ball pressing machine is extremely extensive, which can compact, granulate or press balls on the following materials, such as aluminum shavings, activated carbon, alumina, bauxite, caustic soda, charcoal, clay, coke shavings, coal, cryolite, fertilizer plastics, limestone, pigments, urea, potassium salt Wait a minute. Its purpose is to reduce dust, control bulk density, reuse, and improve transportation characteristics. The design of production capacity is mainly used for pelletizing materials in the Pijiang magnesium smelting process by dry powder pressing.The dry powder ball pressing machine mainly uses the dry method to press the ball, and there is no need to add water during the entire pressing process. It mainly compresses and shapes aluminum chips, magnesium chips, activated carbon alumina, quicklime, etc. High pressure is also one of the main characteristics of dry powder ball pressing machines. The composition of the dry powder ball pressing machine includes an electric motor, a reducer, a triangular belt, a rolling roller, an open gear, a casing, a base, a pressurized feeding device, a pressurized device, and a discharge device.
Product advantages 1,High balling rate:The ball pressing machine not only uses four silver pressurization to increase equipment pressureand improve ball forming rate, but also can be equipped with hydraulic devices according tocustomer requirements.
2,Energy conservation and environmental protection:The mineral powder ball pressing machine mainly compresses and shapes some industrial wasteand dust, and then reuses them to reduce dust pollution, mprove resource utilization, and achievelow-power operation.
3,A wide range of applications:Low environmental requirements for use. Reasonable adjustments can be made to the pressure ballmachine equipment according to the different situations in different countries, such as voltage,engineering design requirements, geographical environment, etc.
4,Easy installation:The ball pressing machine uses high-strength steel plates as a support, which can be directly placedn a horizontally hardened area for use without vibration during operation, and it is also convenientfor users to transfer and transport equlpment.
| Equipment model |
M360-4 |
M450 |
M550 |
M850 |
M1000 |
| Spindle speed (r/min) |
15-17 |
15-17 |
15-17 |
15-17 |
15-17 |
| Motor model |
Y160M-4 |
Y132M-4 |
Y180L-4 |
Y225S-4/Y112M-4 |
Y225S-4/Y112M-4 |
| Production(t/h) |
4-7 |
5-8 |
8-10 |
35-40 |
40-45 |
| Speed ratio |
01:31.5 |
01:31.5 |
01:31.5 |
01:31.5 |
01:31.5 |
Equipment production and usage scenarios
Zhengzhou Fude Machinery Equipment Co, Ltd,Established in 2015,A factorythat integrates machine research, development, manufacturing, and sales,Main production: metal briquetting machines, wood crushers,Organic fertilizer production line and large andmedium-sized equipment for dryers
Service tenet:Integrity based management, To ensure quality control,Satisfy both parties.
Product advantages:
1. High production efficiency, high ball forming strength, and not easy to break.
2. Low operating costs and low consumption of vulnerable parts.
3. High molding pressure, adjustable main engine speed, equipped with screw feeding device.
4. Hydraulic protection, high degree of automation, and reduced downtime.
Ball pressing machine can be used to press various powders, powders, waste materials, and waste residues such as coal powder, coking coal, coal slurry, iron powder, iron filings, mineral powder, slag, tailings, etc. It is widely used in industries such as refractory materials, power plants, metallurgy and chemical engineering, energy, transportation, heating, etc.
Ball pressing machines are widely used due to their simple structure, convenient operation, and reliable performance. The ball press equipment has a high ball forming rate, low power consumption, compact structure, and is easy to maintain and debug. The shape and size of the ball socket on the roller skin of our company's ball press can be selected from a large range according to user needs.
FAQ
Q:Are you a trading company or a manufacturing factory?
A:We are a factory.
Q:What is your delivery time?
A:If the goods are in stock, it usually takes 7-10 days.
If the goods are out of stock, it will take 15 to 30 days, calculated by quantity.
Q:What is your payment method?
A:30% of the total price should be paid in T/T as the down payment; 70%
of the remaining payment should be paid in T/T before delivery.
Q:Do you provide technical guidance?
A:Yes, we will provide you with professional advice on the
selection of models and the operation of equipment.
Audited Supplier 
){kind=link}
){kind=link}