Fully Automatic Industrial Cold Pressed Walnut and Sesame Hydraulic Oil Press

• After-sales Service: Support Customization
• Warranty: 12 Months
• Structure: Horizontal
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: M180
• Press Series: Second
• Voltage: 220V
• Transport Package: Wooden Box
• Specification: 800*650*1100
• Trademark: Fude
• Origin: Henan China
• HS Code: 8479200000
• Production Capacity: 30kg/H
• Package Size: 1200.00cm * 1000.00cm * 1300.00cm
• Package Gross Weight: 260.000kg

Product Description

The advantages of hydraulic oil press are reasonable design, reliable performance, simple operation, and convenient maintenance. Its main characteristics are:
1. High oil output rate - Compared to older equipment, the normal oil output rate can be 2 to 3 times higher.
2. Energy saving - Reduce electricity power by 40% for the same output, and based on an average of 6 kWh of electricity saved per hour, daily production can save 30 yuan in electricity bills.
3. Labor saving - An equal output can save 60% of labor force, and one to two people can organize production, resulting in a daily labor savings of about 40 yuan.
4. Wide use - one machine can be used for many purposes, and can press sesame, peanut, walnut, tea seed, Cocoa bean and other oil crops.

Operating instructions for the new hydraulic sesame oil press Precautions before starting:
Clean the oil tank and add enough hydraulic oil, check for correct wiring connections, and check for loose bolts in all parts.
1. Hold the handle of the top plate wrench and fully open the top plate at a 180 degree angle to the working position. Place a cushion at the bottom of the pressing frame and lower the piston into position
 

2. Preheat before each oil extraction, with a preheating temperature of 50-70 degrees in summer and autumn, and 70-90 degrees in winter and spring. The automatic control of the preheating system does not require the temperature control switch to be turned off.
3. Run the machine empty for 1-2 minutes before each squeezing. If the hydraulic oil becomes thicker in winter or spring, run the machine empty for 5-10 minutes to make the oil thinner and easier to operate.
4. Drain the fried oil and put it into a press frame.

 

5. Place a pad on the top of the oil press frame, place the separator plate on the top of the press frame and push it flat into the press frame. If there is less oil, you can raise the oil when starting the machine to keep the oil on the top plane slightly lower than the press frame End face; Otherwise, the top plate cannot be closed, lift the manual valve handle, and start the press.
 

 

6. The Ju'an brand new hydraulic sesame oil press must be operated by a dedicated person. During the pressure boosting process, the main motor must not leave the human body. When the pressure reaches 55 MPa, the main motor should stop working. Otherwise, the power should be immediately turned off and the pressure should be checked Check if the force gauge is damaged or malfunctioning, and if the AC contactor is damaged. If there is any damage, replace it immediately and check if there are no errors before starting it for use.

 

FAQ
Q:Are you a trading company or a manufacturing factory?
A:We are a factory.
Q:What is your delivery time?
A:If the goods are in stock, it usually takes 7-10 days.
If the goods are out of stock, it will take 15 to 30 days, calculated by quantity.
Q:What is your payment method?
A:30% of the total price should be paid in T/T as the down payment; 70% of the remaining payment should be paid in T/T before delivery.
Q:Do you provide technical guidance?
A:Yes, we will provide you with professional advice on the selection of models and the operation of equipment.