China Biomass Wood Chips Crusher/ Heavy Duty Drum Wood Chipper Machine

• After-sales Service: Support Customization
• Power Source: Electric
• Automatic Grade: Full-Automatic
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: M600
• Warranty: 1 Year
• Category: Wood Working Machine
• Power: Electrical Machinery Diesel Engine
• Using Materials: Branches, Straw, Corn Cobs, Broken Wood, Landscapi
• Accessory: Screens, Hammer Blades
• Transport Package: Wooden Box
• Specification: 200*150
• Trademark: Fude
• Origin: Henan, China
• HS Code: 8474209000
• Production Capacity: 300-500kg/H
• Package Size: 150.00cm * 160.00cm * 150.00cm
• Package Gross Weight: 300.000kg

Product Description

The wood pulverizer produced by our factory integrates slicing and crushing, and can cut wood with a diameter of 1-20 centimeters. It can also be used for cutting and crushing fiber like materials such as bamboo, straw, mushroom, garden branches, corn cobs, etc.It is a new type of production equipment for wood crushing. This wood grinder is particularly suitable for processing wood chips in edible mushroom culture media, and can also be used as raw materials for the production of particleboard and sawdust board high-density boards.

 

Product Features

1. This machine is composed of an array of blades, and materials are crushed by high-speed rotating blades.
2. The processed raw materials enter the feeding mouth and form a self-priming feed through the rotation of the fan blades in the machine, which can improve the agreed Factor of safety.
3. This machine adopts an integrated fan, which can directly pump crushed materials into the car. It has the advantages of small footprint, labor saving, energy saving, and high efficiency.
4. The fineness adjustment of this machine is based on the size of the sieve bottom aperture. The yield is determined based on the size of the finished product you need, and the larger the particle size of the finished product, the greater the yield.

Model	Electrical machinery	Production	Number of blades	Blade size
420M	7.5-11KW	1T/H	4	90*60*10
500M	18.5KW	1.5T/H	4	120*70*10
600M	30KW	2T/H	4	150*70*10

This is a Ideal machine for producing edible fungi and sawdust for cultivation. He can process raw materials such as wood and branches into sawdust. It has various advantages such as small size, less land occupation, low investment, high efficiency, easy use, and maintenance. It is an ideal equipment for developing edible mushroom production with simple operation. This machine can also be used for raw material production of chipboard sawdust, density board and Paper mill

 

The dual inlet crusher can process various types of wood, wood scraps, branches and forks, wood chips, board scraps, bark, bamboo, bamboo bark, and other raw materials into sawdust and filamentous products in one go. It has the characteristics of low investment, low energy consumption, high productivity, good economic benefits, and convenient use and maintenance. After crushing, the particle size of the sawdust is small, the wood fiber is obvious, and the discharge is uniform. The entire equipment is only driven by one electric motor, with a simple structure, compact layout, low price, stable operation, low energy consumption, high output, good quality of the sawdust product, and low processing cost. It can also be used for cutting chips of fiber like materials such as bamboo, thatch, corn stalks, sorghum stalks, etc

Installation and commissioning operations
1. Configure the appropriate power cord and control switch according to the power configuration of the device, connect the power supply, and check if the motor direction is correct.
2. The equipment should be installed on a horizontal concrete foundation and fixed with anchor bolts.
3. When installing, it should be noted that the main engine pulley and motor pulley are pulled in a straight line using a triangular belt
4. After installation, check whether the bolts in each part are loose and whether the main engine compartment door is fastened. If there is any looseness, please tighten it
5. It is strictly prohibited to throw wood with stones and nails into the machine to prevent damage to the knives and internal parts.
6. Pay attention to checking the hammer bolts. If any looseness is found, tighten them immediately. When the hammer and bolts are severely worn, they should be replaced
7. After the inspection is completed, conduct a no-load test run, and production can proceed once the test run is normal.
8. When the particles cannot reach the desired size, switch to a different pore size sieve.
9. When replacing the cutting tool, the blade extends 2-4mm beyond the flat surface of the cutting disc, and then tighten the bolt. If the pressure bolt thread is found to be worn, it should be replaced immediately to prevent damage to the sliding disc nut.
Wood grinder is widely used in machine-made charcoal factory, Foxiang factory, Engineered wood factory, biological power plant, Paper mill sawmill, feed factory, breeding farm, mushroom mushroom base, landscaping project, furniture factory, and wood processing

Effect of using a pulverizer

 

Maintenance and upkeep of the machine:
1. The bearings of the host bear all the load of the machine, so good lubrication has a great impact on the bearing life, which directly affects the service life and operating rate of the machine. Therefore, it is required that the injected lubricating oil be clean and sealed well.
2. Each fastening screw is prone to loosening and must be checked regularly. If there is any looseness, it should be tightened in a timely manner
3. Pay attention to checking the wear level of easily worn parts and promptly replace worn parts.
4. Regularly add lubricating oil to the friction position to ensure mechanical performance and lifespan.
5. If the bearing oil temperature rises, it should be stopped immediately to check the cause and eliminate it,
6. If there is any impact sound during the operation of the rotating gear, it should be immediately stopped for inspection and eliminated
7. After the machinery is not in use, it should be placed indoors and the sawdust inside the machinery should be cleaned to avoid affecting future use and production.

FAQ                                                               
Q:Are you a trading company or a manufacturing factory?
A:We are a factory.
Q:What is your delivery time?
A:If the goods are in stock, it usually takes 7-10 days.
If the goods are out of stock, it will take 15 to 30 days, calculated by quantity.
Q:What is your payment method?
A:30% of the total price should be paid in T/T as the down payment; 70% of the remaining payment should be paid in T/T before delivery.
Q:Do you provide technical guidance?
A:Yes, we will provide you with professional advice on the selection of models and the operation of equipment.