The heat pump dryer is a heat boosting device. The high-temperature heat pump dryer unit utilizes the inverse Carnot principle to absorb heat from the surrounding environment and transfer it to the materials in the dryer; The high-temperature heat pump drying unit mainly consists of four parts: a finned evaporator (external unit), a compressor, a finned condenser (internal unit), and an expansion valve. By continuously evaporating the refrigerant (absorbing heat from the outdoor environment), compressing, condensing (releasing heat in the indoor drying room), and throttling the thermal cycle of repeated evaporation, the heat from the external low-temperature environment is transferred to the drying room, The refrigerant circulates and flows within the system under the action of the compressor. It completes the pressure boosting and heating process of the gas state in the compressor. It enters the internal machine and releases high-temperature heat to heat the air in the drying room. At the same time, it is cooled and converted into a liquid state. When it runs to the external machine, the liquid state quickly absorbs heat and evaporates to convert into a gas state again. At the same time, the temperature can drop to -20 ° C~-30 ° C. At this time, the air around the heat absorber will continuously transfer heat to the refrigerant.
Mastering the operation process proficiently during the operation of the mesh belt dryer can reduce the frequency of malfunctions and ensure safe operation of the equipment: 1. Before operation, the feed door of the dryer should be opened first, the dehydrated fabric should be placed in the rotary drum, and then the feed door should be closed and locked. 2. At the appropriate time, turn the timed rotation button to the desired position. 3. After completing the previous preparation work, start the drying button, rotary drum, and exhaust fan of the dryer, Start normal drying work: 4. During the drying process, always pay attention to the dried fabric so that immediate measures can be taken in case of accidents. 5. During the drying process, if the machine malfunctions, it should be stopped immediately to identify the cause of the malfunction and promptly eliminate it.Suitable for various agricultural products (soybeans, mung beans, and red beans), vegetables (cauliflower, chili peppers, sweet potatoes, artemisia shoots, and rainbow beans), floral tea (tea leaves, honeysuckle, chrysanthemums, osmanthus, and rose flowers).Fruits (mangoes, plums), nuts (pine nuts, walnuts, longans), seasonings (peppercorns, star anise), Chinese herbal medicines (Angelica sinensis, Sichuan scallops), edible mushrooms, wild mushrooms (shiitake mushrooms, red mushrooms, lamb tripe, agaric), meat (dried meat, cured meat, sausages, fish and shrimp, Kunzhong), etc., are dried to retain the aroma of the dried product. The dried product has a good color and appearance.
Before and after material drying
Advantages: 1. Good effect, using low-temperature circulating air static drying method, the dried goji berries have high integrity, thorough drying, easy transportation, and long storage time. 2. Intelligent drying, temperature and humidity can only be controlled, and the drying process does not require a dedicated person to be on duty. Automatic drying saves manpower. 3. Clean and hygienic, enclosed drying room, pure hot air drying, ensuring that the dried wolfberry materials are clean and hygienic in accordance with food hygiene standards. 4. Low cost, air energy heat pump+hot air recovery system, drying directly reduces costs. 5. Environmentally friendly and pollution-free, the air energy heat pump is powered by electricity and operates without any pollution emissions, in accordance with national environmental policies.
The sealed board room for drying is not in contact with the external environment, ensuring the drying quality: full touch screen operation, simple and elegant interface, intelligent and convenient; The same dryer can dry different materials according to different seasons and different items. Adopting high-temperature compressors with multiple protections, the system has a lifespan of up to 15 years; Reasonable structural design, convenient installation and maintenance, stable operation, and simple use; Adopting strong wind convection, the air supply is uniform, and there is no need for manual turnover of materials.
Equipment production and usage scenarios
A dryer is a type of drying equipment that refers to a combination of mechanical devices that use certain technical means to dry water or other liquids on the surface of an object. The popular drying techniques mainly include ultraviolet drying, infrared drying, electromagnetic drying, and hot air drying. They have their own characteristics and are widely used in various mechanical equipment and food drying. The common energy sources on the market for dryers are: air heat pumps, gas, biomass, electric heating, steam, coal/firewood, etc. Using a heat source to provide heat to the drying room to drive the internal heating of the drying room, and then combining with the internal circulating air of the drying machine to dry the product, expelling moisture and achieving the purpose of drying. A dryer is a type of drying equipment that refers to a combination of mechanical devices that use certain technical means to dry water or other liquids on the surface of an object. The popular drying techniques mainly include ultraviolet drying, infrared drying, electromagnetic drying, and hot air drying. They have their own characteristics and are widely used in various mechanical equipment and food drying. The common energy sources on the market for dryers are: air heat pumps, gas, biomass, electric heating, steam, coal/firewood, etc. Using a heat source to provide heat to the drying room to drive the internal heating of the drying room, and then combining with the internal circulating air of the drying machine to dry the product, expelling moisture and achieving the purpose of drying.
Schematic diagram of box dryer factory and loading
FAQ
Q:Are you a trading company or a manufacturing factory?
A:We are a factory.
Q:What is your delivery time?
A:If the goods are in stock, it usually takes 7-10 days.
If the goods are out of stock, it will take 15 to 30 days, calculated by quantity.
Q:What is your payment method?
A:30% of the total price should be paid in T/T as the down payment; 70% of the remaining payment should be paid in T/T before delivery.
Q:Do you provide technical guidance?
A:Yes, we will provide you with professional advice on theselection of models and the operation of equipment. |